How to connect and pair Rexton hearing aids

1. Turn off your Rexton hearing aids. 
   
   
2. Enter pairing mode by pressing and holding  the button on the hearing aids until you see a flashing light or hear a tone indicating they are in pairing mode.
   
   Refer to your specific model's manual as procedures may vary.
   

1. Take your iPhone or iPad and go under Settings.

2. Ensure that Bluetooth is ON.

3. Select Accessibility. For older Apple devices, you may need to select General, then  Accessibility.

4. Scroll down and select Hearing Devices (or MFI Hearing Devices on older iPhones/iPads).

5. Your device will search for your hearing aids automatically. You need to restart your hearing aids to put them into pairing mode, i.e. to make them visible to your device:

• If your hearing aids use batteries: Open and close the battery doors for both of your aids while your device is searching for them.

• If your hearing aids are rechargeable: To restart rechargeable Rexton hearing aids, you can either put them into their charger and take them back out again, or you can hold down the button on each hearing aid to turn them off (hold it while it’s in your ear until you hear a  tune, several seconds), then do this again to turn them on (you will hear another tune after  several seconds). If there are two buttons on each hearing aid, you can hold down either one of them.

6. Your hearing aids will appear as an available device once they are found. Select the name of your hearing aids.

7. Select Pair when you are prompted to do so by your device. You may need to do this twice (once for each hearing aid).

8. Phone calls will now automatically stream from your device to your hearing aids while Bluetooth is on.

1. Use a streamer
   
   If your TV doesn't support Bluetooth, you may need a Bluetooth streamer that connects to the TV and pairs with your hearing aids.
   ​
2. Connect directly 
   
   ​If the TV has Bluetooth, put your hearing aids in pairing mode and connect directly through the TV’s audio settings.

1. Enable Bluetooth on your laptop or computer.
   
   
2. Activate pairing mode on your hearing aids.
   
   
3. Connect by selecting the hearing aids from the laptop’s or computer's Bluetooth settings.
   
   

1. Open the Settings app on your iPhone or iPad, then go to Bluetooth.
   
   
   
2. Activate pairing mode on your hearing aids.
   
   
3. Go back to your device Settings and select your hearing aids by tapping the name of your hearing aids under "Other Devices" to pair.

1. Open the Bluetooth settings on your Android phone.
   
   
   
2. Activate pairing mode on your Rexton hearing aids.
   
   
   
3. Select the hearing aids from the list of available devices in Bluetooth settings to connect.